UAV EFI Electric Start Gasoline Engine 116ccm

1. Hydrogen powered UAVs have longer flight time and range than most battery-powered UAVs.
2. The hydrogen powered uav drone does not require an external power source, which is very suitable for remote and harsh environments.
3. The lightweight design and corrosion-resistant materials of the hydrogen powered uav make it suitable for a wide range of applications, including search and rescue, surveillance and monitoring.

  • Information

Introduction of UAV EFI Electric Start Gasoline Engine 116ccm:

The DLA116UAE EFI engine is an industrial-grade aviation gasoline engine. Compared with the traditional carburetor engine, the ECU (central control unit) controls the engine to automatically calibrate the fuel injection amount under different working conditions and altitudes, so as to promote fuel injection. Complete combustion reduces tail gas pollution and carbon deposits. The EFI engine has high performance features such as high power, fuel saving, low noise, not easy to stall, and one-time ignition. At the same time, the ECU can automatically adjust the ignition angle, fuel injection volume, and idle air control according to the engine temperature and altitude sensor signals

gas powered uav

Advantages of UAV EFI Electric Start Gasoline Engine 116ccm:

1. Horizontally opposed two cylinders;

2. Hydrogen powered uav adopts electronic closed-loop control;

3. The hydrogen powered uav has dual redundant speed sensors;

4. Hydrogen powered uav has better environmental adaptability;

5. Lower fuel consumption, meeting the demand for long flight time.

hydrogen powered uav

Main technical parameters of UAV EFI Electric Start Gasoline Engine 116ccm:

Product number

DLA116UAE

Displacement

116cc

idle speed

1300rpm

maximum pull

25.8KG/50m above sea level

Maximum power

12HP

compression ratio

8:1

Cylinder Bore*Stroke

46mm*35mm

spark plug

Double iridium spark plug*2

Startup supply voltage

6s/7s lithium battery

Starting system weight

 

Motor: 753g

Controller: 410g

EFI system weight

 

ECU:182g

Oil pump: 234g

Engine and accessories weight

 

 

 

Engine: 3494g

Exhaust pipe: 127*2g

Bracket: 22*4g

Igniter 191g

fuel/lubricant

Above 92#/2T fully synthetic engine oil

Power output

24V/28V 600W/800W

Applicable models

fixed wing, vertical takeoff and landing fixed wing

Lubrication ratio

25:1~30:1 (grinding time)

hybrid uav engine

Dimensional drawing of UAV EFI Electric Start Gasoline Engine 116ccm:

gas powered uav

The difference between hydrogen powered uav and gas powered uav:

hydrogen powered uav: uses hydrogen as fuel, generates electrical energy through hydrogen fuel cells, and drives the electric motor to work.

Gas powered UAV: uses fuel (usually petroleum fuel) as fuel, burns the fuel through an internal combustion engine, and generates power to drive the inorganic.

hydrogen powered UAV: Hydrogen reacts with oxygen to produce electrical energy, which drives the motor to rotate, thereby driving the UAV to fly. Hydrogen fuel cells feature high energy density and zero emissions.

Gas powered UAV: The fuel is burned in the internal combustion engine to produce high-temperature and high-pressure gas. The gas is ejected through the injection port and generates thrust to propel the UAV to fly. Gas-powered drones often have longer flight times and larger payload capabilities.

hydrogen powered uav

About us :

Shenyang Linghang Aviation Science&Technonlogy Co., Ltd. (" LHTechUAV") was established on March 20, 2018 in Sanhao Street, Heping District, Shenyang City, Liaoning Province. It is located in one of the first ten special commercial streets in China, which is a distribution center for computer and IT products in Liaoning Province and the whole Northeast region. The company focuses on the application of UAVs, unmanned aerial equipment, light sport aircraft and other low-altitude aerial vehicles and their components composite materials research and development, production and sales, for general aviation equipment, military and civilian unmanned aerial equipment to provide one-stop R & D, design, manufacturing, technical support, etc. to provide a full range of system solutions.

hybrid uav engine

Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required